Kansai Paint Marine Co.,Ltd. Co., Ltd. Kansai Paint Marine Co.,Ltd.
Product informationCorporate Information
JapaneseRegarding this website
Kansai Paint Marine Co.,Ltd.
  About marine productsNKM productsProduct Data SheetCoating Specification
Contact us
Kansai Paint Marine Co.,Ltd. Home : Product information : Coating specification : Standard specification for Repaired ship (large size vessels) [Hold] Kansai Paint Marine Co.,Ltd.
Kansai Paint Marine Co.,Ltd.

Coating specification
New building ships (both coastal and ocean-going) Repaired ships (ocean-going vessels, large vessels) Repaired ships (coastal vessels, small ships) image


[Hold]


Surface preparation Coating Specification DFT
(µm/coat)
(Spot maintenance case)
Dust and salt should be removed by high pressure water washing and let the surface dry.
Dirt, oil, grease etc. should be removed by solvent or chemical cleaner wipe.
Loose film should be removed by scraper.
Rusty spots should be treated by powertool to ISO 8501-1(SIS)St3
JOTAMASTIC 87 Touch-up 1 coat 200
(All over maintenance case)
Dirt, oil, grease etc. should be removed by solvent or chemical cleaner wipe.
Full area should be sandblasted to more than ISO8501-1 (SIS)Sa2.5.
Dust on the surface should be removed thorough before coating.
SD ZINC 100QD
EPOMARINE SCRATCHGUARD
 
Full coat
Stripe coat
Full coat
1 coat

2 coat
25
(50)
150

Remark: DFT for Ballast/ Hold double use is more than 250µm


Kansai Paint Marine Co.,Ltd. All rights reserved.