Kansai Paint Marine Co.,Ltd. Co., Ltd. Kansai Paint Marine Co.,Ltd.
Product informationCorporate Information
JapaneseRegarding this website
Kansai Paint Marine Co.,Ltd.
  About marine productsNKM productsProduct Data SheetCoating Specification
Contact us
Kansai Paint Marine Co.,Ltd. Home : Product information : Coating specification : Standard specification for Repaired ship (large size vessels) [Ballast tank] Kansai Paint Marine Co.,Ltd.
Kansai Paint Marine Co.,Ltd.

Coating specification
New building ships (both coastal and ocean-going) Repaired ships (ocean-going vessels, large vessels) Repaired ships (coastal vessels, small ships) image


[Ballast tank]


Surface preparation Coating Specification DFT
(µm/coat)
(Spot maintenance by Barrier)
Salt and sludge should be cleaned by fresh water washing and let the surface dry.
Oil & fat should be removed by solvent or chemical cleaner wipe.
Loose rusts and paint film should be removed by scraper.
Existing paint film surface should be roughened by wire-brush or sand-paper.
NuFORTE BARRIER Touch-up 1-2 coat 1000
-2000
(Spot maintenance on Pre-PSPC film)
Super high pressure water washing (Hydrojet more than 15,000psi) or powertool treatment on the rusty/damaged spots to more than ISO 8501-1(SIS)St2.
Other area should be high pressure water washed and remove dirt and salt.
NuFORTE DX
NuFORTE DX
Touch-up
Full coat
1 coat
1 coat
200
150
(*PSPC)
Maintenance & Midterm Repair
(5-10years)
Surface Preparation
(St3.0 or Sa2.5)
EPOMARINE EX21
EPOMARINE EX21
*Double Stripe coat essential
Spray coat
Spray coat
1 coat
1 coat*
125
125
(*PSPC)
Maintenance & Midterm Repair
(5-10years)
Surface Preparation
(St3.0 or Sa2.5)
EPOMARINE EX21
EPOMARINE EX21
*Double Stripe coat essential
Spray coat
Spray coat
1 coat
1 coat
160
160

* MSC.1/Circ.1330 (GUIDELINES FOR MAINTENANCE AND REPAIR OF PROTECTIVE COATINGS)

Maintenance = By ship's crew on board, Repair = By shipyard




Kansai Paint Marine Co.,Ltd. All rights reserved.